headstock bearings and seals ktm exc440 exc 440 1994 1995 Yamaha XJ650 with a 12mm top pin

with a 12mm top pin and 10mm bottom pin which you can change if required either by using your old bushes or purchasing a bush kit from us

and Special SG & SH

Honda DN01 (NSA700A) (2008-2009)

the PW50 exhaust gasket and the clamp

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda RVF750 for the years and models shown above

headstock bearings and seals ktm exc440 exc 440 1994 1995 Yamaha XJ650 with a 12mm top pinBrand new set of headstock steering bearings and seals to fit: KTM EXC 440 (1994 1995). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM EXC440 for the years and models shown above. Top sized: 29mm x 50. 25mm x 15mm. Bottom sized: 29mm x 50. 25mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require